Do your industrial applications need a diverse air pressure supply in a compressed air system? You must choose Shavo filter regulators, which consist of two different components filter and regulator. Hence, users who want to know the mechanism of a filter regulation system should understand the mechanism of filters and regulators separately.
Air in a compressor system is dirty or wet and often warm. Indeed, it may harm or reduce the life of valves or similar other downstream instruments. Hence, before industries should use
the air, they should clean and control it by using filter regulation systems offered by Honeytech Controls Pvt. Ltd. A regulator controls the precision and speed of the air and
liquid flow. However, the filter cleans the impure air that enters or goes from the compressor. For this, airline filters strain, scrub, and trap dust, dirt, and other solid particles while
separating liquids inside the compressed air. Filters are present in the upstream airline of lubricators, regulators, and air-driven and directional control valves, like air motors and cylinders.
Shavo filter regulators are available in two different dimensions, which are 40 micros and 5 micros. According to the rule, industries should perform air filtration to 40 micros first before they should apply 5 microns of filtration. Regardless of the dimensions, filter regulators have found applications for the removal of liquid water and several other particulate matters
from compressed sources of air. If this is not enough, many industries choose filter regulating units in various operations based on operating pressure, air quality requirements of any tool
via compressed air, flow rate, and according to workplace quality standards.
Our professionals at Honeytech Controls Pvt. Ltd. are responsible for supplying varieties of filter regulation systems to let you accomplish your industrial applications. If you want
details, you should check our official website today.
Specification :
| PRODUCT IMAGE | PIPE SIZES | MODEL | MAX. INLET PRESSURE |
BOWL CAPACITY | FILTER ELEMENT SIZE |
MATERIAL OF CONSTRUCTION BODY, BONNET, BOWL/ INTERNAL PARTS/ EXTERNAL PARTS | STANDARD NOMINAL FLOW RATE | CV VALUE | PRESSURE ADJUSTMENT | REGULATED SECONDARY PRESSURE RANGES |
GAUGE PORT |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
1/4", 3/8”, 1/2” | SB20 | 17.5 bar (254 psi) |
135ml | 25 Micron - Standard 5, 40 Micron - Optional |
Aluminium Alloy die-cast / Aluminium, SS304, SS316, Acetal resin, Nylon, Brass etc. / SS 316 | 104 scfm (50 dm3/sec) - 1/4" 177 scfm (84 dm3/sec) - 3/8" 272 scfm(130 dm3/sec)- 1/2") |
(1.96) - 1/4" (3.35) - 3/8" (5.14) - 1/2" |
T ' handle Standard | 1.0- 10.0 bar (15.0 - 150 psi) - Standard 0.4- 4.0 bar (6.0 - 60 psi) - Optional 0.86- 8.6 bar (12.5 - 125 psi) - Optional 0.21 –2.1 bar(3.0-30 psi) - Optional 1.70 –17.5 bar(25-250 psi) - Optional |
1/8" BSPT (Fe) - Standard 1/8" NPT (Fe) - Optional |
 |
1/4”, 3/8”, 1/2”, 3/4”, 1” |
SB60 | 17.5 bar (254 psi) |
270ml | 25 Micron - Standard 5, 40 Micron - Optional |
Aluminium Alloy die-cast / Aluminium, SS304, SS316, Acetal resin, Nylon, Brass etc. / SS 316 |
104 scfm (50 dm3/sec) - 1/4" 182 scfm (87 dm3/sec) - 3/8 " 372 scfm (177 dm3/sec)- 1/2 " 383 scfm (182 dm3/sec) - 3/4 " & 1" |
(1.96) - 1/4" (3.43) - 3/8" (7.02) - 1/2" (7.24) - 3/4" & 1" |
T ' handle Standard | 1.0- 10.0 bar (15.0 - 150 psi) - Standard 0.35-3.5 bar (5 - 50 psi) - Optional 0.86- 8.6 bar (12.5 - 125 psi) - Optional 0.21 –2.1 bar(3.0-30 psi) - Optional 1.70 –17.5 bar(25-250 psi) - Optional |
1/8" BSPT (Fe) - Standard 1/8" NPT (Fe) - Optional |
 |
3/4”, 1", 1¼” , 1½” |
SB70 | 17.5 bar (254 psi) |
1000 ml | 40 Micron - Std. (5, 25 Micron - Optional) |
Aluminium Alloy die-cast Alu., SS304, SS316L, Acetal resin, Nylon, Brass etc. SS 316L | 515 scfm (243 dm3/sec) - 3/4" 600 scfm (283 dm3/sec) - 1" 600 scfm (283 dm3/sec) - 1¼" 600 scfm (283 dm3/sec) - 1½" |
(9.70) - 3/4" (11.30) - 1" (11.30) - 1¼" (11.30) - 1½" |
Square headed screw - Standard | 1.0 to 10.0 bar (15.0 - 150 psi) - Standard 0.4 to 4.0 bar (6.0 - 60 psi) - Optional 0.86 to 8.6 bar (12.5 - 125 psi) - Optional 0.21 to 2.10 bar (3 - 30 psi) - Optional 1.70 to 17.5 bar (25 - 250 psi) - Optional |
1/8” BSPT (Fe) - Standard 1/8” NPT (Fe) - Optional |
 |
1/8", 1/4” | SB77 | 30 bar (435 psi) |
30ml | 25 Micron - Standard 5, 40 Micron - Optional |
STAINLESS STEEL AS PER AISI 316 SS 316 with NACE Compaliance (MR 0175) / SS 316, SS 304 / SS 316 | 18 scfm (8.4 dm3/sec) - 1/8" 19 scfm (9.0 dm3/sec) - 1/4" |
(0.41) - 1/8" (0.57) - 1/4" |
Allen Headed Adjusting Screw - Standard | 0.70 - 7.0 bar (10-100 psi) - Standard 0.07- 0.70 bar (1 - 10 psi) - Optional 0.21- 2.10 bar (3- 30 psi) - Optional 0.35- 3.50 bar (5 - 50 psi) - Optional 1.0- 10.0 bar (15.0 - 150 psi) - Optional |
1/8" NPT (Fe) - Standard 1/8" BSPT (Fe) - Optional |
 |
1/4", 3/8" | SB27 | 30 bar (435 psi) |
160ml | 25 Micron - Standard 5, 40 Micron - Optional |
STAINLESS STEEL AS PER AISI 316 SS 316 with NACE Compaliance (MR 0175)/ SS 316, SS 304/ SS 316 | 74 scfm (35 dm3/sec) -1/4" 173 scfm (82 dm3/sec) -3/8" |
(1.39) - 1/4" (3.26) - 3/8" | Hex headed Adjusting Screw - Standard T ' handle Optional | 1.0- 10.0 bar (15.0 - 150 psi) - Standard 0.4- 4.0 bar (6.0 - 60 psi) - Optional 0.86- 8.6 bar (12.5 - 125 psi) - Optional 1.7- 17.5 bar (25 - 250 psi) - Optional 0.21- 2.10 bar (3- 30 psi) - Optional |
1/4" NPT (Fe) - Standard 1/4" BSPT (Fe) - Optional |
 |
1/2", 3/4" | SB67 | 30 bar (435 psi) |
160 ml | 25 micron - Standard 5, 40 micron - Optional |
Stainless Steel as per AISI 316L SS 316L with NACE compliance (MR 0175) SS 316L / SS 304 SS 316L with NACE compliance (MR 0175) | 192 scfm (91 dm3/sec) - 1/2" 340 scfm (162 dm3/sec) - 3/4" |
(3.62) - 1/2” (6.42) - 3/4” |
Hex headed Adjusting Screw - Standard T ' handle Optional | 1.0- 10.0 bar (15.0 - 150 psi) - Standard 0.4- 4.0 bar (6.0 - 60 psi) - Optional 0.86- 8.6 bar (12.5 - 125 psi) - Optional 1.7- 17.5 bar (24.5 - 250 psi) - Optional 0.21- 2.10 bar (3- 30 psi) - Optional |
1/4" BSPT (Fe) - Standard 1/4" NPT (Fe) - Optional |
 |
1", 1½" | SB67 | 30 bar (435 psi) |
425 ml | 25 micron - Standard 5, 40/50 micron - Optional |
Stainless Steel as per AISI 316L SS 316L with NACE compliance (MR 0175) SS 316L/ SS 304 SS 316L with NACE compliance (MR 0175) | 500 scfm (236 dm3/sec) - 1" 525 scfm (248 dm3/sec) - 1½" |
(9.40) - 1" (9.90) - 1½" |
Hex Headed Adjusting screw - Standard ‘T’ handle - Optional |
1.0 to 10.0 bar (15.0 - 150 psi) - Standard 0.21 to 2.10 bar (3.0 - 30 psi) - Optional 0.4 to 4.0 bar (6.0 - 60 psi) - Optional 0.86 to 8.6 bar (12.5 - 125 psi) - Optional 1.70 to 17.5 bar (25 - 250 psi) - Optional |
1/4" BSPT (Fe) - Standard 1/4" NPT (Fe) - Optional |
 |
1/4", 3/8" | SB 37 | 30 bar (435 psi) |
100ml | 25 Micron - Standard 5, 40 Micron - Optional |
STAINLESS STEEL AS PER AISI 316 SS 316 with NACE Compaliance (MR 0175)/ SS 316, SS 304/ SS 316 | 74 scfm (35 dm3/sec) - 1/4" 156 scfm (74 dm3/sec) - 3/8" |
(1.40) - 1/4" (2.94) - 3/8" |
Hex Head adjusting screw - Standard ‘T’ Handle - Optional |
1.0 to 10.0 bar (15.0 - 150 psi) - Standard 0.21 to 2.10 bar (3 - 30 psi) - Optional 0.4 to 4.0 bar (6.0 - 60 psi) - Optional 0.86 to 8.6 bar (12.5 - 125 psi) - Optional 1.70 to 17.5 bar (25 - 250 psi) - Optional |
1/4" BSPT (Fe) - Standard 1/4" NPT (Fe) - Optional |
 |
1/2", 3/4" | SB 37 | 30 bar (435 psi) | 100 ml | 25 micron - Standard 5, 40 micron - Optional |
Stainless Steel as per AISI 316L SS 316L with NACE compliance (MR 0175) SS 316L / SS 304 SS 316L with NACE compliance (MR 0175) | 277 scfm (132 dm3/sec) - 1/2" 355 scfm (169 dm3/sec) - 3/4" |
(5.22) - 1/2" (6.69) - 3/4" |
Hex Head adjusting screw - Standard ‘T’ Handle - Optional |
1.0 to 10.0 bar (15.0 - 150 psi) - Standard 0.21 to 2.10 bar (3 - 30 psi) - Optional 0.4 to 4.0 bar (6.0 - 60 psi) - Optional 0.86 to 8.6 bar (12.5 - 125 psi) - Optional 1.70 to 17.5 bar (25 - 250 psi) - Optional |
1/4" BSPT (Fe) - Standard 1/4" NPT (Fe) - Optional |
 |
1", 1½" | SB 37 | 30 bar (435 psi) |
320 ml | 25 micron - Standard 5, 40 micron - Optional |
Stainless Steel as per AISI 316L SS 316L with NACE compliance (MR 0175) SS 316L / SS 304 SS 316L with NACE compliance (MR 0175) | 500 scfm (236 dm3/sec) - 1" 525 scfm (248 dm3/sec) - 1½" |
(9.40) - 1" (9.90) - 1½" |
Hex Head adjusting screw - Standard ‘T’ Handle - Optional |
1.0 to 10.0 bar (15.0 - 150 psi) - Standard 0.21 to 2.10 bar (3 - 30 psi) - Optional 0.4 to 4.0 bar (6.0 - 60 psi) - Optional 0.86 to 8.6 bar (12.5 - 125 psi) - Optional 1.70 to 17.5 bar (25 - 250 psi) - Optional |
1/4" BSPT (Fe) - Standard 1/4" NPT (Fe) - Optional |