Many industries often need lubrication systems to apply metered or controlled amounts of lubricant.Shavo lubricators mainly provide controlled quantities of tool oil within a compressed air system. Doing so will reduce the friction of various moving devices. Many cylinders, air tools, air motors, valves, and related air-driven instruments need lubrication to extend their life.
Airline lubricators resolve the issue of too little or too much lubrication, which may take place from the conventional lubrication technique. These lubricators may even supply lubricants in appropriate amounts for the used tools. The reason is that airline lubrication systems supplied by Honeytech Controls Pvt. Ltd. have adjustable units to supply lubricants in metered quantities from them. Common features of a lubrication device are adjustable volume, pressure switches, low-level safety switches, pressure gauges, temperature switches, temperature gauges, heat exchangers, and integral filters.
In most cases, lubrication systems are available in oil fog or micro fog configurations. Oil fog Shavo lubricators add oil to the airstream of compressed air systems to lubricate air motors,air tools, and actuators to extend their lives. Many modern actuators and valves possess improved sealing materials to eliminate additional lubrication. Moreover, oil-fog lubrication devices employ meter screws with fine adjustments to adjust the oil flow from the nearby reservoir bowl via the passing airstream.
Other than that, industries use spray lubricators to spray lubrication on the required surface. A few industries also use feed-type lubrication systems, which further categorize as single-line, multi-line, dual-line, and circulating oil lubricators. Common applications of lubrication systems are dies, compressed air lines, cables, chains, gears, bearings, spindles, pumps, and several other moving or rotating machinery components.
We at Honeytech Controls Pvt. Ltd. have a team of expert engineers to supply a few of the advanced lubrication systems to meet the lubrication requirements of your industry. If you want details, visit our website.
Specification :
| PRODUCT IMAGE | PIPE SIZES | MODEL | MAX. INLET PRESSURE |
TYPE | MATERIAL OF CONSTRUCTION BODY & BOWL / INTERNAL PARTS / EXTERNAL PARTS | STANDARD NOMINAL FLOW RATE | CV VALUE | MINIMUM FLOW REQD. TO START (AT 6 BAR INLET) | BOWL CAPACITY |
|---|---|---|---|---|---|---|---|---|---|
 |
1/4", 3/8", 1/2" | SL20 | 17.5 bar (254 psi) |
Micromist / Oilfog |
Aluminium Alloy die-cast / Aluminium, SS304, SS316, Acetal resin, Nylon, Brass etc. / SS 316 | 73 scfm (35 dm3/sec) - 1/4” 156 scfm (74 dm3/sec) - 3/8” 209 scfm (100 dm3/sec) - 1/2” |
(1.38) -1/4" (2.94) -3/8" (3.94) -1/2" |
2.5 scfm (1.2 dm3/sec) -1/4” 3.9 scfm (1.8 dm3/sec) -3/8”, 1/2” |
135 ml |
 |
1/4", 3/8", 1/2", 3/4" & 1" | SL60 | 17.5 bar (254 psi) |
Micromist / Oilfog |
Aluminium Alloy die-cast / Aluminium, SS304, SS316, Acetal resin, Nylon, Brass etc. / SS316 | 73 scfm (35 dm3/sec) - 1/4” 123 scfm (59 dm3/sec) - 3/8” 265 scfm (126 dm3/sec) - 1/2” 265 scfm (126 dm3/sec) - 3/4” |
(1.37) -1/4" (2.31) -3/8" (5.00) -1/2" (5.00) -3/4" & 1" |
2.1 scfm (1 dm3/sec) -1/4”, 3/8” 3.2 scfm (1.5 dm3/sec) -1/2” 3.2 scfm (1.5 dm3/sec) - 3/4” |
270 ml |
 |
3/4”, 1", 1¼”, 1½” | SL70 | 17.5 bar (254 psi) |
Micro -Mist / Oil Fog |
Aluminium Alloy die-cast Alu., SS304, SS316L, Acetal resin, Nylon, Brass etc. SS316L | 328 scfm (154 dm3 /sec) - 3/4" 410 scfm (193 dm3 /sec) - 1" 410 scfm (193 dm3 /sec) - 1¼" 410 scfm (193 dm3 /sec) - 1½" |
(6.20) - 3/4" (7.70) - 1" (7.70) - 1¼" (7.70) - 1½" |
7.2 scfm (3.4 dm3 /sec) | 1 litre |
 |
1½", 2" | SL18 | 17.5 bar (254 psi) |
Micro - Mist / Oil Fog |
Aluminium Alloy die-cast Alu., SS304, SS316L, Acetal resin, Nylon, Brass etc., SS316L | 800 scfm (378 dm3/sec) - 1½" 800 scfm (378 dm3/sec) - 2" |
(15.09) - 1½" (15.09) - 2" |
200 scfm (95 dm3/sec) | 1 Litre |
 |
1/4”, 3/8” | SL27 | 17.5 bar (254 psi) |
Oil fog | STAINLESS STEEL AS PER AISI 316 SS 316 with NACE Compaliance (MR 0175) SS316 / SS304, SS316 / SS316 | 31 scfm (15 dm3/sec) - 1/4” 44 scfm (21 dm3/sec) - 3/8” |
(0.58) - 1/4” (0.84) - 3/8" |
2.5 scfm (1.2 dm3/sec) - 1/4” 3.9 scfm (1.8 dm3/sec) - 3/8” |
160 ml |
 |
1/2”, 3/4” | SL67 | 17.5 bar (250 psi) | Oil fog | STAINLESS STEEL AS PER AISI 316 SS 316 with NACE Compaliance (MR 0175) SS316 / SS304, SS316 / SS316 | 127 scfm (60 dm3/sec) - 1/2” 133 scfm (63 dm3/sec) - 3/4” | (2.39) - 1/2” (2.50) - 3/4" | 3.9 scfm (1.8 dm3/sec) - 1/2” 3.9 scfm (1.8 dm3/sec) - 3/4” | 160 ml |